Panel selection for S40, Umbra and A40 doors

S40

S40 is the most frequently used overhead door panel. The S40 is a universally applicable panel, made in steel. The 40-mm thick steel sandwich panels have finger safe protection, because the focus is on safety. Extra thick steel on the outside and a fire-retardant polyurethane inner foam core ensure a high insulation value.

Available colours

The S40 panel is available in 18 standard RAL colours: 1021, 3000, 5010, 6009, 7016, 8014, 9002, 9006, 9007, 9010, 1015, 5003, 6005, 7021, 7022, 7035, 9001 and 9005.

S80

The S80 is an 80-mm thick steel sandwich panel that is fully thermally separated and as such offers an energy efficient solution. The fire-retardant polyurethane foam core skinned with steel results in an extra high insulation value.

The steel panels have a Stucco finish with horizontal lines on both the inside and outside. The inner skin is finished as standard in RAL 9002. The outer skin is finished in a RAL colour of choice.

Available colours

The S80 panel is available in three standard RAL colours: 9002, 9006 and 7016.

T40

The T40 model is a steel sandwich panel that, like the S40, has steel skins separated by a fire-retardant polyurethane foam core. The T40 does not feature finger safe protection.

Available colours

The T40 is available in six standard RAL colours: 6009, 7016, 9002, 9006, 9007 and 9010.

A40

The A40 overhead door is constructed from horizontal maintenance-free aluminium sections featuring finger safe protection. The unusual thing about these sections is that they can be made to specification, and fitted with many types of filling and glazing.

A40 sections also frequently serve as glazed sections in an S40, Design-Line Umbra or T40, which provides additional light transmission and a stylish appearance.

The sections are as standard made of anodised aluminium. However, they can also be powder coated in any desired RAL colour.

A80

The A80 overhead door is constructed from horizontal aluminium sections that are thermally separated. The sections can be made to specification and can be fitted with many types of filling and/or glazing. As standard, the aluminium sections have quadruple glazing. With an A80 door, optimum insulation is guaranteed and in addition, a lot of daylight enters the building.

For additional light transmission and a stylish appearance, the A80 sections are frequently used as glazed section in an S80.

The sections are as standard made of anodised aluminium. However, they can also be powder coated in any desired RAL colour (according to the Qualicoat standard).

Umbra

The Design-Line Umbra is a steel panel featuring microprofiling . To guarantee safety, this panel also features finger safe protection.

Available colours

The Umbra is available as standard in four RAL colours:  7016, 9006, 9007 and 9016.